Next working day delivery is available on this product if ordered by 2pm
Arbo Arbokol 1025 SP Swimming Pool Sealant
Arbo Arbokol 1025 SP is a unique two part epoxy sealant which cures to form a hard wearing seal, designed to accommodate small amounts of movement in extension but considerable movement in compression.
Recommended for use in a variety of internal stress relief joint systems where continual water resistance and a high degree of chemical resistance (especially to common cleaning substances) are required.
- Swimming pools
- Compression joints
- Tile to tile joints (no primer required)
- Long term water immersed joints
- Shower rooms.
NB. Not recommended for structural joints
The joint surfaces must be clean and free from all contamination.
Surfaces should be degreased using the appropriate surface.
The ratio of base to curing agent controls the performance properties of Arbo Arbokol 1025 SP and tins are filled off to an exact mixing ratio. It is vital therefore that the whole contents of the curing agent tin are added to the base tin. The 2 components must be thoroughly mixed to ensure complete homogeneity (Spiral “pig tail” mixing equipment is recommended).
Where applicable, appropriate joint filler, e.g. closed cell polyethylene foam should be used to provide the correct joint depth.
All joint preparation and sealant application should be carried out in accordance with BS8000 Part 16 (British standard for the sealing of joints in buildings).
20 years + in non critical applications. Use in swimming pools will lower this figure (depending upon application performance required).