Everbuild GalvaMate Sealant C3

EBGALVMATE
High performance, slump resistant adhesive and sealant for high and low velocity ducting in heating and ventilation applications. Adheres to galvanized and stainless steel surfaces.

SGAN

EBGALVMATE

Size

C3 Cartridge

Packs per Box

25

Unit Price

£2.75   + VAT

Qty

Our price

£68.75 £82.50 inc VAT

RRP

£97.00 £116.40 inc VAT

HUGE SAVINGS ON BULK ORDERS Call 0845 177 0666 for a bespoke quote

PRODUCT INFORMATION

Product Code: EBGALVMATE

EVERFLEX GALVA MATE is a high performance adhesive and sealant specifically designed for sealing high and low velocity ducting in heating and ventilation applications.

Product Description

EVERFLEX GALVA MATE is a high performance adhesive and sealant specifically designed for sealing high and low velocity ducting in heating and ventilation applications.

Benefits

  • Very strong adhesion to galvanized and stainless steel surfaces.
  • Excellent slump resistance.
  • Remains permanently flexible.
  • Quick skinning and curing.
  • Contains a high level of fungicide to prevent mould growth in areas of high humidity.
  • Overpaintable when cured.
  • Certified under the harmonized European standard EN15651 for façade interior applications in compliance with the Construction Product Regulation

Areas For Use

  • For sealing high velocity ducting
  • For sealing ventilation grills/jointing etc.

Limitations

  • For internal use only.
  • Do not use in areas of high abrasion or below ground level.
  • Do not use on surfaces which bleed oils or plasticisers.
  • Do not use in contact with bitumen or asphalt.
  • Cure time may be extended in cold or damp conditions.

Surface Preparation

All surfaces must be clean and dust free.  All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application.  May be applied to damp, but not wet surfaces.

Application

When assembling ducting joints, particular reference should be made to the guidelines set out by the Heating and Ventilation Contractors Association.

Cut the tip of the cartridge taking care not to damage the thread.  Apply nozzle and cut cleanly at an angle of              45’ with an opening slightly larger than the gap to be sealed.  Apply using a standard sealant gun.  Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed. Smooth down within 20 minutes of application using a wetted spatula, piece of wood or wetted finger.  Care should be taken at this point not to saturate the surface as this will delay drying.  Any excess sealant etc., can be removed using a sponge and warm water. A small amount of shrinkage occurs on cure. If a flush finish is required, fill the joint slightly proud of surface to allow for shrinkage.

Specific Data

Form Ready to use thixotropic paste
Specific Gravity 1.64 – 1.70
Elongation at Break (%) 250-300% DIN53504
Hardness (Shore A) Approximately 30
Tack Free Time 15 to 60 mins, dependent on thickness, ambient temperature and humidity
Full Cure 3 to 5 days, dependent on thickness, ambient temperature and humidity
Solids Content ~80%
Slump Resistance No slump ISO7390
Application Temp. Range +4°C to +40°C
Service Temp. Range -15°C to +75°C
Chemical Resistance Dilute Acids  – Fair                               Dilute Alkaline – Fair
Aliphatic Hydrocarbons – Fair              AromaticHydrocarbons – Poor
Movement Accommodation Low to medium (+/- 5%)
Durability Up to 15 years when used as recommended
Compatibility Should not be used in conditions of continuous immersion, belowground or  in areas of high abrasion (e.g. floor joints)
Limitations Should not be used in conditions of continuous immersion, below ground level, in areas of high abrasion (e.g. floor joints).

Health & Safety

Consult MSDS for full list of hazards

Storage

Store in cool dry conditions and protect from frost.

Shelf Life

24 months from date of manufacture.  AVOID FROST.

SGAN

EBGALVMATE

Size

C3 Cartridge

Packs per Box

25

Unit Price

£2.75   + VAT

Solseal Delivery Terms

PLEASE NOTE: Due to the ongoing COVID-19 situation, please allow 4 to 5 working days* for delivery unless “Next Working Day Express Delivery!” is stated beside the Product Name on your Sales Confirmation. Please be assured we will dispatch your goods as quickly as possible and keep you updated. Many thanks for your order and patience.

(*subject to stock availability)

The following Sika Everbuild items will be delivered next working day when ordered by 11am*

Size
Contractors Silicone 200 white, clear C3
125 One Hour Caulk 310
450 Builders Silicone Translucent 310
825 LM all colours 380
996 LM Trans, Black, Clear 380
HM 60 Sanitary White, Translucent 310
S50 MM White, Translucent 310
S50 MM Jasmine, Manhattan Grey 310
Silicone 500 Ivory, Sandstone, Prem White C3
Fire Sealant 300 Grey, White 380
Fire Sealant 400 Grey, White 380
Antipick 109 Grey, Soft Linen, White 310
Stayseal NP75 1.2L
NP 2 Primer 1L
P1 Primer 1L
Sika Primer 3N 1L
Hybriflex 25LM White 380
Hybriflex 480 Grey, White 380
Hybriflex FL Grey 600
Puraflex 40 Grey, White, Black 600
Puraflex 25 Grey, White 300
225 Industrial Silicone, Brushed Steel, Black 600
Cleanroom Silicone 565 310
335 Construction Silicone, Bronze, Toffee, Grey, Brown 300
  Mapesil AC HM Colours 310
Stixall Black, White, Grey 300
Stixall Clear 300

 

Round Backer Rod 12mm 900
Round Backer Rod 15mm 500
Round Backer Rod 20mm 300
Round Backer Rod 25mm 200
Flat Backer Foam 30x10mm (1/2Roll Size) + 20x10mm roll 160
Flat Backer Foam 30x10mm (Full Roll Size) 320
Wonder Wipes Trade each
Solseal Hook Knives 76mm each
Solseal Blades (100/pack) each
Solseal Scrapers each
Solseal Extn Nozzles for 310mm each
600ml Cox Bulk Gun each
Solseal HD Skeleton Gun (Geocel-Cox) each
Solseal Wire Brush 200mm each
Sika Sanisil HM White, Clear 300ml
  Sikaflex Pro 3 Grey, Black 600ml
  Sikaflex Pro 3 Self Levelling Grey, Black 600ml
  Sikasil Pool Grey, White C3
  Sikabond TF Plus N – EPDM Membran Adhesive 600ml
  Sika EPDM Membran 100mm x 25m each
  Sika EPDM Membran 150mm x 25m each
  Sika EPDM Membran 200mm x 25m each
  Sika EPDM Membran 250mm x 25m each
  Sika EPDM Membran 300mm x 25m each
  Palu Tooling Block each
 Tooling Sticks (pack of 4) each
 Sika Plastix 22a Silicone LM Anthracite 300ml
 Solseal EPDM Roller 100ml each
 Solseal EPDM Roller 150ml each
 Solseal EPDM Scissors each
 Titan Dolphin Knife each
 Primer Brush each
 Dusting Brush each

 

MAPEI PRODUCTS

All orders are next working day service on orders received by 11.30am, and 48-hour delivery on orders received after 11.30am.
Cost: £9.95 + vat (or £6.95

ARBO & DOW CORNING / GEOCEL PRODUCTS

All orders are next working day service on orders received by 10.30am, and 48-hour delivery on orders received after 10.30am
Cost: £19.95 + vat

FEB PRODUCTS

Standard orders (less than 6 units) – orders received by 11:30am will be delivered within 2 working days, orders received after 11:30am will be delivered within 3 working days*
Cost: £19.95 + vat

Large orders (of 6 units or more) – orders received by 11:30am will be delivered the following day, orders received after 11:30am will be delivered within 2 working days*
Cost: £19.95 + vat

FOSROC PRODUCTS

Please call us on 0845 177 0666 for all orders and delivery details, as the lead-in times and availability of products vary.