Top brands
We only distribute the best
Free next day delivery
on selected in-stock items
Bulk order discounts
Call 01708 855698
Mapei Mapeproof ESM DPM 4kg
Product code: 2420104
Standard Delivery 3-5 Days
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Mapei Eco Prim Grip Plus
Mapei Eco Prim T Plus
Mapei Eporip Solvent Free Epoxy Crack Repair
Mapei Mapeproof ESM FAQs
What is Mapei Mapeproof ESM?
Mapei Mapeproof ESM is a two-part , solvent free, pure epoxy resin, used as a moisture vapour barrier on cement-based substrates containing high residual moisture.
How much Mapei Mapeproof ESM do I need?
Per 4kg unit 1 coat system will cover approximately 13m² and 2 coat system will cover approximately 20m².
Is Mapei Mapeproof ESM compatible with underfloor heating systems?
Yes, Mapei Mapeproof ESM can be used with underfloor heating systems.
How long is Mapei Mapeproof ESM workable for?
- +10c – 120 minutes
- +23c – 90 minutes
- +30c – 60 minutes
What is the application procedure for 2 Coat system - Power Floated and New Substrates
- The substrate should be abraded by mechanical means to remove any curing agents or contamination, to assist penetration and adhesion of the membrane.
- The area should then be thoroughly vacuumed to remove all dust and debris.
- Apply Mapeproof ESM ensuring it is well worked into the substrate and that complete coverage of the area is achieved at a maximum rate of 13 m per 4 kg unit (depends on the porosity of the sub-floor) and allow to cure (approx. 5 hours).
- When cured, a coat of Eco Prim T Plus or Eco Prim Grip Plus primer should then be applied within maximum 24 hours (primer drying times vary with ambient conditions i.e. temperature and humidity).
- The levelling compounds should be applied within 24 hours of the primer application.
What is the application procedure for 2 Coat system - Sand/Cement and Existing Substrates
- All existing materials, adhesives, laitance and contamination should be removed prior to preparation work commencing.
- Any cracks in the substrate should be filled with Eporip.
- Where the substrate has a textured or profiled finish, Latexplan Trade levelling compound should be applied to provide a level surface for the membrane to be applied onto.
- Apply the first coat of Mapeproof ESM ensuring it is well worked into the substrate and that complete coverage of the area is achieved at a maximum rate of 20 m² per 4 kg unit (depends on the porosity of the sub-floor) and allow to cure (approx 5 hours).
- Apply the second coat of Mapeproof ESM at right angles to the first coat, again ensuring complete coverage.
- When the second coat has cured, a coat of Eco Prim T Plus or Eco Prim Grip Plus primer should then be applied within maximum 24 hours. (primer drying times vary with ambient conditions i.e. temperature and humidity).
- The levelling compound should be applied within 24 hours of the primer application.
- If required, the second coat of Mapeproof ESM can be blinded with sharp sand (when still fresh), which removes the need for a primer.
- It is essential that pinhole free coatings be achieved.