solseal

Sika Sikaflex Pro 3 600ml – Next Day Express Delivery

Units per pack

20
Sika Sikaflex PRO 3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance. For indoor and outdoor applications.

SGAN

SKPRO3SKPRO3-GREY

Size

600ml

Unit Price

£4.95   + VAT

Qty

Our price

£4.95 £5.94 inc VAT

RRP

£6.29 £7.55 inc VAT

HUGE SAVINGS ON BULK ORDERS Call 0845 177 0666 for a bespoke quote

Next Working Day Delivery on this product for orders received by 11am!

Sikaflex Pro 3

Sikaflex Pro 3 is a 1-part, polyurethane, tough, coloured, elastic joint sealant for sealing many types of joint configurations in floors and civil engineering structures. It provides a waterproof seal with good mechanical properties, provides resistance to chemicals and remains elastic over a wide range of temperatures.

 

Uses

Horizontal and vertical interior and exterior sealing joint applications:

  • Food industry
  • Cleanrooms
  • Sewage treatment plants
  • Tunnels

Sealing horizontal and vertical joints for:

  • Floors
  • Pedestrian and traffic areas
  • Car park parking decks
  • Warehouse and production floor areas

 

Characteristics / Advantages

  • Movement capability ±35 %
  • Good mechanical and chemical resistance
  • Bubble-free curing
  • Over-paintable
  • Good adhesion to defined construction materials
  • Very low emissions

Sika Sikaflex Pro 3 is resistant to water, seawater, diluted alkalis, cement slurry and water dispersed detergent, diesel and jet fuel according to the DIBt guidelines. Sika Sikaflex Pro 3 is not resistant to alcohols, organic acids, concentrated alkalis and concentrated acids and other hydro-carbons.

Sika Sikaflex Pro 3 has a shelf life of 15 months from the date of production, if stored in an undamaged, original, sealed packaging and if the storage conditions are met.

Sika Sikaflex Pro 3 shall be stored in dry conditions, where it is protected from direct sunlight and at temperatures between +5 °C and +25 °C.

 

View our full and comprehensive Sika product range

Product Data Sheet

Sikaflex Pro 3 Technical Information

Uses

A multi purpose floor joint sealant suitable for

  • Movement and connection joints in floors
  • Indoor and out door applications for pedestrian and traffic areas (e.g.parking
  • decks, car parks)
  • In warehouses and production areas
  • On surfaces such as in the food industry
  • In ceramic tiles such as in public buildings etc.
  • Joints in waste water and sewage treatment plants
  • Floor joints in tunnel construction
  • Application in clean rooms

Sikaflex Pro 3 Characteristics and Advantages

  • Movement capability 25%
  • Bubble-free curing
  • Very good application properties
  • Good mechanical and chemical resistance
  • Very good adhesion to most construction materials

Specific Approvals/Standards

  • Conforms to EN15651-4 class 25 HM for interior & exterior and cold climate areas
  • Conforms to ISO 11600 F 25 HM
  • Tested according principals of DIBT for Waste Water Exposure
  • EMICODE EC1 PLUS R, very low emission
  • ISEGA Certificate for foodstuff area usage.
  • This product has been tested to meet the requirements of Regulation 31 (4)(b) of the Water Supply (Water Quality) Regulations 2000 and that the Secretary of State is satisfied that this product either alone or in combination with any other substance or product in the water is unlikely to affect adversely the quality of the water supplied. A copy of this test report is available on request.
  • CSM TVOC tested (ISO-6.8)
  • CSM biological resistant : very good
  • Resistance against Diesel and Jet Fuel according to the DIBT guidelines

Specific Characteristics

  • Solvent free
  • Odourless
  • Recyclable aluminium packaging (600 ml sausages and 300 ml cartridges)

Substrate Preparation / Priming

Clean and dry, homogeneous, free from oils and grease, dust and loose or friable particles. Cement laitance must be removed.

It has a generally strong adhesive property to most clean, sound substrates.

For optimum adhesion and critical, high performance applications such as multi story building work, for high stress bonding joints or in case of extreme weather exposure substrate primers and cleaners must be used. If in doubt apply product in test area first.

Non porous substrates: Glazed tiles, powder coated metals, aluminium, anodised aluminium, stainless steel and galvanised steel have to be cleaned with a fine abrasive pad and Sika Aktivator-205 by using a clean towel or cloth. Before sealing allow a flash off time of at least 15 min.

All other metal surfaces not mentioned above have to be cleaned with a fine abrasive pad and Sika Aktivator-205 by using a clean towel or cloth. After a flash off time of at least 15 minutes, apply Sika Primer-3N by using a brush. Before sealing allow a flash off time of at least 30 minutes (max. 8 hours).

For PVC use Sika Primer-215. Before sealing allow a flash off time of at least 30 minutes (max. 8 hours).

Porous substrates: Concrete, aerated concrete and cementitious renders, mortars, brick, etc. have to be primed with Sika Primer-3N by using a brush.

Before sealing allow a flash off time of at least 30 minutes (max. 8 hours).

Important note: Primers are only adhesion promoters. They neither substitute for the correct cleaning of the surface nor improve their strength significantly.

Primers improve long term performance of a sealed joint. For further information please refer to the Sika Primer table.

Substrate Temperature

+5°C min. / +40°C max.

Ambient Temperature

+5°C min. / +40°C max.

Dew Point

Substrate temperature must be 3°C above dew point.

Application Method/ Tools

Supplied ready to use.

After suitable joint and substrate preparation, insert Backing Rod to required depth and apply primer if necessary. Insert cartridge into sealant gun and firmly extrude in to joint making sure that it is full contact with the side of the joint. Fill the joint, avoiding air entrapment. It must be tooled firmly against joint sides to ensure good adhesion.

Masking tape must be used where sharp exact joint lines or exceptionally neat lines are required. Remove the tape whilst the sealant is still soft. Sleek joint with smoothing liquid for a perfect sealant surface.

Tool Cleaning

Clean all tools and application equipment with Sika Remover-208 / Thinner C immediately after use. Hardened (cured) material can only be removed mechanically

SGAN

SKPRO3
SKPRO3-GREY

Size

600ml

Packs per Box

20

Solseal Delivery Terms

PLEASE NOTE: Due to the ongoing COVID situation please allow 4 to 5 working days for delivery unless “Next Day Express Delivery!” is stated beside the Product Name on your Sales Confirmation, in which case your goods will be delivered on the next working day** for orders received by 11am. Please be assured we will dispatch your order as quickly as possible*.

(*subject to stock availability – **please note our warehouses are not open at weekends or on public Bank Holidays)

The following Sika Everbuild items will be delivered next working day when ordered by 11am*

Size
Contractors Silicone 200 white, clear C3
125 One Hour Caulk 310
450 Builders Silicone Translucent 310
825 LM all colours 380
996 LM Trans, Black, Clear 380
HM 60 Sanitary White, Translucent 310
S50 MM White, Translucent 310
S50 MM Jasmine, Manhattan Grey 310
Silicone 500 Ivory, Sandstone, Prem White C3
Fire Sealant 300 Grey, White 380
Fire Sealant 400 Grey, White 380
Antipick 109 Grey, Soft Linen, White 310
Stayseal NP75 1.2L
NP 2 Primer 1L
P1 Primer 1L
Sika Primer 3N 1L
Hybriflex 25LM White 380
Hybriflex 480 Grey, White 380
Hybriflex FL Grey 600
Puraflex 40 Grey, White, Black 600
Puraflex 25 Grey, White 300
225 Industrial Silicone, Brushed Steel, Black 600
Cleanroom Silicone 565 310
335 Construction Silicone, Bronze, Toffee, Grey, Brown 300
  Mapesil AC HM Colours 310
Stixall Black, White, Grey 300
Stixall Clear 300

 

Round Backer Rod 12mm 900
Round Backer Rod 15mm 500
Round Backer Rod 20mm 300
Round Backer Rod 25mm 200
Flat Backer Foam 30x10mm (1/2Roll Size) + 20x10mm roll 160
Flat Backer Foam 30x10mm (Full Roll Size) 320
Wonder Wipes Trade each
Solseal Hook Knives 76mm each
Solseal Blades (100/pack) each
Solseal Scrapers each
Solseal Extn Nozzles for 310mm each
600ml Cox Bulk Gun each
Solseal HD Skeleton Gun (Geocel-Cox) each
Solseal Wire Brush 200mm each
Sika Sanisil HM White, Clear 300ml
  Sikaflex Pro 3 Grey, Black 600ml
  Sikaflex Pro 3 Self Levelling Grey, Black 600ml
  Sikasil Pool Grey, White C3
  Sikabond TF Plus N – EPDM Membran Adhesive 600ml
  Sika EPDM Membran 100mm x 25m each
  Sika EPDM Membran 150mm x 25m each
  Sika EPDM Membran 200mm x 25m each
  Sika EPDM Membran 250mm x 25m each
  Sika EPDM Membran 300mm x 25m each
  Palu Tooling Block each
 Tooling Sticks (pack of 4) each
 Sika Plastix 22a Silicone LM Anthracite 300ml
 Solseal EPDM Roller 100ml each
 Solseal EPDM Roller 150ml each
 Solseal EPDM Scissors each
 Titan Dolphin Knife each
 Primer Brush each
 Dusting Brush each

 

MAPEI PRODUCTS

All orders are next working day service on orders received by 11.30am, and 48-hour delivery on orders received after 11.30am.
Cost: £9.95 + vat (or £6.95

ARBO & DOW CORNING / GEOCEL PRODUCTS

All orders are next working day service on orders received by 10.30am, and 48-hour delivery on orders received after 10.30am
Cost: £19.95 + vat

FEB PRODUCTS

Standard orders (less than 6 units) – orders received by 11:30am will be delivered within 2 working days, orders received after 11:30am will be delivered within 3 working days*
Cost: £19.95 + vat

Large orders (of 6 units or more) – orders received by 11:30am will be delivered the following day, orders received after 11:30am will be delivered within 2 working days*
Cost: £19.95 + vat

FOSROC PRODUCTS

Please call us on 0845 177 0666 for all orders and delivery details, as the lead-in times and availability of products vary.