Sika Sikaflex Pro 3 600ml – Pallet Deal 960 Foils

Sika Sikaflex PRO 3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance. For indoor and outdoor applications.

Units per pack






Unit Price

£5.25   + VAT


Our price

£5.25 £6.30 inc VAT


£6.12 £7.34 inc VAT

HUGE SAVINGS ON BULK ORDERS Call 0845 177 0666 for a bespoke quote

Free delivery on this product for orders received by midday

Sikaflex Pro 3

Sikaflex Pro 3 is a 1-part, polyurethane, tough, coloured, elastic joint sealant for sealing many types of joint configurations in floors and civil engineering structures. It provides a waterproof seal with good mechanical properties, provides resistance to chemicals and remains elastic over a wide range of temperatures.



Horizontal and vertical interior and exterior sealing joint applications:

  • Food industry
  • Cleanrooms
  • Sewage treatment plants
  • Tunnels

Sealing horizontal and vertical joints for:

  • Floors
  • Pedestrian and traffic areas
  • Car park parking decks
  • Warehouse and production floor areas


Characteristics / Advantages

  • Movement capability ±35 %
  • Good mechanical and chemical resistance
  • Bubble-free curing
  • Over-paintable
  • Good adhesion to defined construction materials
  • Very low emissions

Sika Sikaflex Pro 3 is resistant to water, seawater, diluted alkalis, cement slurry and water dispersed detergent, diesel and jet fuel according to the DIBt guidelines. Sika Sikaflex Pro 3 is not resistant to alcohols, organic acids, concentrated alkalis and concentrated acids and other hydro-carbons.

Sika Sikaflex Pro 3 has a shelf life of 15 months from the date of production, if stored in an undamaged, original, sealed packaging and if the storage conditions are met.

Sika Sikaflex Pro 3 shall be stored in dry conditions, where it is protected from direct sunlight and at temperatures between +5 °C and +25 °C.


View our full and comprehensive Sika product range

Product Data Sheet

Sikaflex Pro 3 Technical Information


A multi purpose floor joint sealant suitable for

  • Movement and connection joints in floors
  • Indoor and out door applications for pedestrian and traffic areas (e.g.parking
  • decks, car parks)
  • In warehouses and production areas
  • On surfaces such as in the food industry
  • In ceramic tiles such as in public buildings etc.
  • Joints in waste water and sewage treatment plants
  • Floor joints in tunnel construction
  • Application in clean rooms

Sikaflex Pro 3 Characteristics and Advantages

  • Movement capability 25%
  • Bubble-free curing
  • Very good application properties
  • Good mechanical and chemical resistance
  • Very good adhesion to most construction materials

Specific Approvals/Standards

  • Conforms to EN15651-4 class 25 HM for interior & exterior and cold climate areas
  • Conforms to ISO 11600 F 25 HM
  • Tested according principals of DIBT for Waste Water Exposure
  • EMICODE EC1 PLUS R, very low emission
  • ISEGA Certificate for foodstuff area usage.
  • This product has been tested to meet the requirements of Regulation 31 (4)(b) of the Water Supply (Water Quality) Regulations 2000 and that the Secretary of State is satisfied that this product either alone or in combination with any other substance or product in the water is unlikely to affect adversely the quality of the water supplied. A copy of this test report is available on request.
  • CSM TVOC tested (ISO-6.8)
  • CSM biological resistant : very good
  • Resistance against Diesel and Jet Fuel according to the DIBT guidelines

Specific Characteristics

  • Solvent free
  • Odourless
  • Recyclable aluminium packaging (600 ml sausages and 300 ml cartridges)

Substrate Preparation / Priming

Clean and dry, homogeneous, free from oils and grease, dust and loose or friable particles. Cement laitance must be removed.

It has a generally strong adhesive property to most clean, sound substrates.

For optimum adhesion and critical, high performance applications such as multi story building work, for high stress bonding joints or in case of extreme weather exposure substrate primers and cleaners must be used. If in doubt apply product in test area first.

Non porous substrates: Glazed tiles, powder coated metals, aluminium, anodised aluminium, stainless steel and galvanised steel have to be cleaned with a fine abrasive pad and Sika Aktivator-205 by using a clean towel or cloth. Before sealing allow a flash off time of at least 15 min.

All other metal surfaces not mentioned above have to be cleaned with a fine abrasive pad and Sika Aktivator-205 by using a clean towel or cloth. After a flash off time of at least 15 minutes, apply Sika Primer-3N by using a brush. Before sealing allow a flash off time of at least 30 minutes (max. 8 hours).

For PVC use Sika Primer-215. Before sealing allow a flash off time of at least 30 minutes (max. 8 hours).

Porous substrates: Concrete, aerated concrete and cementitious renders, mortars, brick, etc. have to be primed with Sika Primer-3N by using a brush.

Before sealing allow a flash off time of at least 30 minutes (max. 8 hours).

Important note: Primers are only adhesion promoters. They neither substitute for the correct cleaning of the surface nor improve their strength significantly.

Primers improve long term performance of a sealed joint. For further information please refer to the Sika Primer table.

Substrate Temperature

+5°C min. / +40°C max.

Ambient Temperature

+5°C min. / +40°C max.

Dew Point

Substrate temperature must be 3°C above dew point.

Application Method/ Tools

Supplied ready to use.

After suitable joint and substrate preparation, insert Backing Rod to required depth and apply primer if necessary. Insert cartridge into sealant gun and firmly extrude in to joint making sure that it is full contact with the side of the joint. Fill the joint, avoiding air entrapment. It must be tooled firmly against joint sides to ensure good adhesion.

Masking tape must be used where sharp exact joint lines or exceptionally neat lines are required. Remove the tape whilst the sealant is still soft. Sleek joint with smoothing liquid for a perfect sealant surface.

Tool Cleaning

Clean all tools and application equipment with Sika Remover-208 / Thinner C immediately after use. Hardened (cured) material can only be removed mechanically





Solseal Delivery Schedule


Orders placed before midday will be dispatched for delivery the same day (except weekends and bank holidays) subject to stock availability.

Orders placed after midday will be dispatched the next working day (except weekends and bank holidays) subject to stock availability.

When you have placed your order our dispatch team will prepare your items for collection from our couriers. When the couriers have collected your items you will be emailed a tracking number.

Please note: Our offices and warehouses are open Monday to Friday, 8am to 5pm. We are closed on weekends and bank holidays. ‘Working day’ is Monday to Friday.

Please allow 3-5 working days for your delivery unless ‘Next Day Express Delivery’ is stated.

If you have ordered a product that is listed as ‘Next Day Express Delivery’ before midday on Monday to Friday your order will be processed an dispatched the same day delivered the next working day.

For example. If you order a product listed as ‘Next Day Express Delivery’ on Monday before midday it will be delivered the next day (Tuesday).

If you order a product listed as ‘Next Day Express Delivery’ on Friday before midday it will be delivered the next working day (Monday).

If you order a product listed as ‘Next Day Express Delivery’ on Friday after midday it will be processed the next working day (Monday) and delivered the following working day (Tuesday).


Orders for UK Mainland

Any orders placed Monday to Friday before midday will be processed and dispatched the same day.

Any orders placed Monday to Friday after midday will be processed and dispatched on the next working day.

Saturday delivery is available on request only – please call 01708 855 698 for a quote.


Orders for Scottish Highlands and offshore locations

We will always endeavour to deliver to you as quickly as possible and at the best possible price.

However please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge to our normal UK carriage fees and in some cases can take longer to be delivered, so please call us on 01708 855 698 for a bespoke quote and place your order with us over the phone.

AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, ZE (ALL)