Free next working day delivery is available for this product if ordered by 2pm
Geo Fix All Weather Jointing Compound
Geo Fix All Weather Jointing Compound is a unique, ready to use jointing material that’s suitable to use on all types of paving, which have joints with a minimum of 6 mm width and 25mm depth.
The self-setting jointing compound is a quick and easy way of applying a rigid joint on most common paving types including Natural Stone, Concrete, Slate, Clay, Terracotta and Granite. With advanced durability, its all-weather properties mean that it can be used in both dry and wet conditions.
Geo Fix All Weather Jointing Compound can withstand almost any amount of rain without the quality of the product being compromised.
Benefits of using Geo Fix All Weather Jointing Compound
Geo Fix All Weather Jointing Compound has plenty of benefits, including:
- Supplied ready to use, no mixing required.
- Can be used in both wet and dry conditions.
- Simply brush into joints and compact.
- Cement free – Non-staining.
- Sets hard, won’t crack or wash out.
- Resists weeds and plant growth.
- Totally weatherproof, unaffected by frost.
- For all joints of 6mm wide and over.
- Water permeable, allows water to escape.
Where can Geo Fix All Weather Jointing Compound be used?
Geo Fix All Weather Jointing Compound is suitable for a range of pathing types, including:
- Outdoor patio areas.
- Indoor stone floor areas.
- Pedestrian areas.
- Driveways subject to light occasional vehicular traffic.
How to apply Geo Fix All Weather Jointing Compound
Geo Fix is supplied ready to use and does not require any further mixing or addition of other materials. Ensure that the paving to be jointed is dry and free from loose dirt, oil, debris and grease etc.
It is essential the joint widths are a minimum of 6mm wide with a minimum depth of 25mm. deeper joints can be filled with dry sand or other materials to meet the required minimum depth.
Before applying the compound, wet the paving surface. The paving must be kept wet during application but free from standing water. Not wetting the paving surface will result in temporary staining. Ensure that the areas where you are not working remain wet at all times.
This is particularly important in warm or hot weather conditions.
Carefully open the vacuum-packed bag and sprinkle sufficient Geo Fix All Weather Jointing Compound over the wet paving to cover an area of 2-3 m2(see coverage table below). Using a soft brush, push the Geo Fix All Weather Jointing Compound into the joints ensuring that they are filled with the compound.
The material MUST be compacted into the joints.
Work the Geo Fix All Weather Jointing Compound into the joints with a pointing tool. Top up and compact ensuring a fully compacted and topped up the joint. Carefully sweep off any excess with a soft brush ensuring that the material is swept at a 450 angle to the joints.
Finish the surface decoratively giving a smooth flat finish with a pointing tool before moving onto the next area to be jointed.
Any residue left on the surface when cured can be simply cleaned off by sweeping with a stiff brush. Material or residue that has been left exposed for more than 30 minutes should NOT be used, as it will be adversely affected.
Use Geo Fix All Weather Jointing Compound within 45 minutes of opening. In temperatures exceeding 25oC, the material must be used within 30 minutes of opening the bag. Always follow the manufacturer’s instructions carefully.
As the company cannot be aware of all the applications and materials the product may be used on, it is the user’s responsibility to determine suitability for use.
(The figures given below are an approximate coverage based on a 14gk bucket)
|Stone Size||Joint Size 10mm(W) x 25mm(D)|
|600mm x 600mm||8.25 – 9m2|
|600mm x 450mm||6.50 – 7.25m2|
|450mm x 450mm||5.75 – 6.25m2|
|300mm x 450mm||4.75 – 5.25m2|
|300mm x 300mm||3.75 – 4.25m2|
View our full Landscaping Product Range