ultraproducts

Fosroc Nitoseal MS300 (600ml 10 pack)

FOMS300GR
Free Next Day Express Delivery | Fosroc Nitoseal MS300 is a one part, high modulus sealant based on hybrid silyl modified polyether technology.

Units per pack

10

Size

600ml

Colour

Grey

Unit Price

£7.95   + VAT

Out of stock

BIG SAVINGS ON BULK ORDERS Call 01708 855 698 for a bespoke quote
Click and Collect Available

Fosroc Nitoseal MS300 (600ml 10 pack)

Fosroc Nitoseal MS300 is a one part, high modulus sealant based on hybrid silyl modified polyether technology. It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads. Nitoseal MS300 may be applied between 6mm and 20mm wide, for trafficked joints (up to 40mm non-trafficked). In most cases it is recommended to form a sealing slot with a square cross-section, subject to a minimum 10mm depth.

To ensure the sealant operates within its stated movement accommodation capacity the sealing slot widths should be designed in accordance with the recommendations of BS6093. Fosroc Nitoseal MS300 is also available in a non-tainting grade suitable for food area applications (Nitoseal MS300FG)

Product Code: FOSMS300

Fosroc Nitoseal MS300 is suitable for sealing saw-cut and movement joints in internal floors, and external joints where abrasion resistance is required. It can also be used for external facade joints where a tougher seal is required.

Uses

  • Factory floors
  • Sports stadia terracing
  • Shopping centres
  • Warehouse and distribution depots
  • Concrete hardstanding areas
  • Prisons

Advantages

  • Suitable for forklift truck traffic
  • Suitable for saw cut and perimeter joints
  • Abrasion resistant
  • Withstands vehicular traffic
  • Single component
  • Fast rate of cure
  • Easy to apply at low temperature
  • Can be applied to damp substrates
  • Primer-less for most applications (see “Priming” section)
  • Hard, but flexible sealant; resists picking and vandalism

Description

It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads. Nitoseal MS300 may be applied between 6mm and 20mmwide, for trafficked joints (up to 40mm non-trafficked). Inmost cases it is recommended to form a sealing slot with a square cross-section, subject to a minimum 10mm depth.

To ensure the sealant operates within its stated movement accommodation capacity the sealing slot widths should be designed in accordance with the recommendations of BS6093.

Preparation

Joints in concrete should preferably be sawn. After sawing all saw slurry must be flushed away and the joint allowed to dry.
When resealing the existing sealant should be removed from the joint and the arris cleaned back to sound clean concrete.
Remove all debris. The joint surfaces must be dry, clean and frost free. Remove all contaminants by rigorous wire brushing, grinding or grit blasting.
Any expansion joint filler must be checked to ensure it is tightly packed and no gaps or voids exist at the base of the sealing slot before positioning a bond breaker.
Note: The use of a bond breaker is not required in expansion joints containing Hydrocell XL cellular polyethylene expansion joint filler. For construction or contraction joints a bond breaker tape or back-up strip should be used. Where a particularly neat finish is required, mask the face edges of the joint before priming/sealing and remove immediately after tooling is completed.

Priming

Fosroc Primer MS2 is required for joints that are to be intermittently or permanently immersed, or where the substrate is likely to be saturated (for example, externally).
When using a primer, empty the entire contents of the hardener tin into the base tin and replace the base tin lid. Mix thoroughly by shaking for at least 2 minutes. Prime the joint face using a clean, dry brush. Avoid over application of primer causing puddles in the bottom of the joint. Nitoseal MS300 should be applied between 30 minutes and 4 hours after priming.
If a joint is left unsealed for more than 4 hours, the primer should be removed by grit blasting or grinding and the joint re-primed. Do not split packs of Fosroc Primer MS2


View our full range of Fosroc Products

View our full range of Sealants

Size

600ml

Colour

Grey

Solseal Delivery Schedule

Orders placed before midday will be dispatched for delivery the same day (except weekends and bank holidays) subject to stock availability.

Orders placed after midday will be dispatched the next working day (except weekends and bank holidays) subject to stock availability.

When you have placed your order our dispatch team will prepare your items for collection from our couriers. When the couriers have collected your items you will be emailed a tracking number.

Please note: Our offices and warehouses are open Monday to Friday, 8am to 5pm. We are closed on weekends and bank holidays. ‘Working day’ is Monday to Friday.

Please allow 3-5 working days for your delivery unless ‘Next Day Express Delivery’ is stated.

If you have ordered a product that is listed as ‘Next Day Express Delivery’ before midday on Monday to Friday your order will be processed an dispatched the same day delivered the next working day.

For example. If you order a product listed as ‘Next Day Express Delivery’ on Monday before midday it will be delivered the next day (Tuesday).

If you order a product listed as ‘Next Day Express Delivery’ on Friday before midday it will be delivered the next working day (Monday).

If you order a product listed as ‘Next Day Express Delivery’ on Friday after midday it will be processed the next working day (Monday) and delivered the following working day (Tuesday).

 

Orders for UK Mainland

Any orders placed Monday to Friday before midday will be processed and dispatched the same day.

Any orders placed Monday to Friday after midday will be processed and dispatched on the next working day.

Saturday delivery is available on request only – please call 01708 855 698 for a quote.

 

Orders for Scottish Highlands and offshore locations

We will always endeavour to deliver to you as quickly as possible and at the best possible price.

However please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge to our normal UK carriage fees and in some cases can take longer to be delivered, so please call us on 01708 855 698 for a bespoke quote and place your order with us over the phone.

AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)