Product Code: FBFLORULTRA
Heavy Duty Universal Levelling & Resurfacing Compound
Description of Product
FEBFLOR ULTRALAY is a ultra high strength, rapid setting, abrasion resistant cement based powder, which when mixed with water, can be used to level out uneven floors and screeds. FEBFLOR ULTRALAY may be overlaid with common floor coverings or may be left as a final wearing surface. FEBFLOR ULTRALAY will even accept vehicular traffic. FEBFLOR ULTRALAY may be applied in one coat from 2-20mm in depth. Typical surfaces include concrete and screeding, existing unglazed ceramic tiles, brick, stone etc. When mixed as directed, the compound provides a free flowing mix that may be walked on in 2 hours and can be overlaid with ceramic tiles after only 3 hours at normal temperatures. NOTE: when overlaying with other floor coverings allow 24 hours drying time for each 10mm depth.
For levelling and smoothing concrete and screeded floors where a heavy duty floor topping is required.
Features and Benefits
§ Self smoothing, ultra durable finish – may be used as a final wearing surface and even withstands vehicular traffic.
§ Rapid Setting – may be walked on in approximately 2 hours depending on temperature.
§ May be covered with ceramic tiles after only 3hrs @20°C.
§ Fills 2-20mm depth in one coat.
§ Economical to use – simply pre-blend with water.
Instructions for Use
Preparation of Substrate
Floors to be treated must be free from grease, dust and loose particles. Existing concrete screeds must be a minimum of 4 weeks old before applying this product. Always prepare floors by dampening with water then priming with FEBOND PVA diluted 1 part PVA to 3 parts water to give a sound, slightly damp surface.
Floors to be treated must be free from grease, dust and loose particles. Substrates must be porous. Always prepare floors by dampening with water then priming with FEBOND PVA diluted 1 part PVA to 3 parts water to give a sound, slightly damp surface.
20kg of FEBFLOR ULTRALAY will require 4 litres of water. DO NOT USE EXCESS WATER. Always add the powder to water. This should be carried out by stepwise addition whilst stirring until a free flowing creamy compound is produced. Pour the mixture out into the prepared floor and allow it to find its own level. Trowel down lightly to achieve an overall thickness not exceeding 20mm. For depths above 10mm, extension with 3mm granite chippings is recommended for heavy duty/vehicular applications. Where further finishing is required, allow the surface to stiffen, usually ¾ to one hour after application, and lightly sprinkle with water and carefully trowel to produce a smooth appearance. Do not sprinkle excessive water or over trowel at this stage. Allow 3 days cure prior to subjecting to vehicular traffic @20°C, longer at lower temperatures.
20kg of FEBFLOR ULTRALAY mixed with 4 litres of water will cover approximately 2.4m2 at a depth of 5mm depending on substrate .
Store in cool, dry conditions as for Portland Cement.
9 months when stored as recommended by the manufacturer.
Technical Data/Typical Properties
Appearance Grey granular powder
Pot life 20 minutes at 20°C
Cleaning All tools and equipment should be cleaned with water
Application Temp 4oC to 35oC
Overlay time 3-8 hours @20oC depending on covering used
Thickness 2mm- 20mm