UltraTile ProLevel Fibre Plus Renovation Floor Leveller 20kg
Product code: UT PROLEVEL FIBRE PLUS
Next day delivery
Product Description
- Unit Size: 20kg
- Classification: CT- C35-F8 AR0.5
- Depth: 3-75mm
- Working time at 20°C: 20-30 Minutes
- Walk on hardness time at 20°C: 3 hours (3mm application)
- Tile after: 4 hours
- Internal & External use
- Can be used as a finish wear surface
- Formulated with FibreBond technology
- Excellent flexibility for timber floors and underfloor heating systems
- 20kg : 4.5L mixing ratio
Product code: UT PROLEVEL FIBRE PLUS
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
All orders are shipped on a Next Working Day Service, however Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
UltraTile ProLevel Fibre FAQs
What is UltraTile ProLevel Fibre?
UltraTile ProLevel Fibre is a 1-part high strength, rapid drying and curing concrete floor leveller.
What surfaces and substrates can I use UltraTile ProLevel Fibre on?
- Concrete subfloors
- Tamped or pan floated concrete
- Sand/cement screeds
- Existing smoothing underlayments
- Radiant electrical underfloor heating system
- Terrazzo/granolithic ceramic tiles
- Anhydrite/calcium sulphate/gypsum based screeds
- Plywood/tile backer board
- Warm water underfloor heating
- UltraFloor DPM IT
How do I mix UltraTile ProLevel Fibre?
Pour 4.5 litres of water into an oversized bucket (20+ litres), and then gradually add the powder whilst mixing continually with an electric drill with power
whisk. When all powder is added mix for a further 2 minutes, keeping the whisk below the surface (to minimise air entrapment) until a lump free creamy material is attained.






