Top brands
We only distribute the best
Free next day delivery
on selected in-stock items
Bulk order discounts
Call 01708 855698
UltraFloor Level IT Super 30
Product code: LEVEL IT SUPER 30 COMPLETE
UltraFloor Level IT Super30 is a high strength, rapid setting and drying smoothing underlayment. Designed for fast turnaround projects, Level IT Super30 is suitable for use as an underlayment for...
More informationStandard Delivery 3-5 Days
Product Description
- Foot traffic in as little as 30 minutes
- Ready to receive unbonded floor coverings after 45 minutes and bonded coverings in 90 minutes
- Use over most common subfloors
- UFH compatible
- Low odour
- Protein free
- Coverage: approx 6m² at 2mm
- 2-15mm thickness
- Size: 20kg bag and 4ltr bottle
- NBS Source registered for ease of specification
Product code: LEVEL IT SUPER 30 COMPLETE
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Ultra Floor DPM It Rapid Curing Primer Membrane
UltraFloor Level IT Super 30 FAQs
What is UltraFloor Level IT Super 30?
UltraFloor Level IT Super 30 is a 2-part, rapid setting & rapid drying, high strength smoothing finishing compound or use over a wide variety of subfloors.
How do I prepare the surface before applying UltraFloor Level IT Super 30?
All surfaces must be dry and in a sound and stable condition free from contaminants that may prevent adhesion such as dust, oils, grease, surface laitance, water soluble adhesive residues and weak smoothing underlayments etc. Smooth dense surfaces must be roughened by mechanical scabbling to enhance the key. Subfloors should be tested in accordance with BS8203 to ensure a moisture reading of less than 75% RH is achieved. Where this has not been attained or where there is uncertainty that the subfloor design incorporates a DPC then UltraFloor DPM IT or UltraFloor Suppress IT must be applied .
UltraFloor recommend consultation with subfloor preparation equipment suppliers to ensure correct equipment for the substrates is selected. All substrates must be at a minimum temperature of 5°C before, during and after application of the primer to ensure film forming and bonding is achieved.
Do I need to use a primer for UltraFloor Level IT Super 30?
Yes, it’s recommended to use a primer for UltraFloor Level IT Super 30.
Absorbent Subfloors (concrete, sand & cement, existing smoothing underlayments): Prime with UltraFloor Prime IT Multi-surface Primer (MSP) apply first coat typically diluted 3 parts water, 1 part primer and allow to fully dry (usually 1-2 hours). Apply a second coat diluted 1:1 with clean water allowing it to dry to a pink film (1-2 hours). On highly porous substrates a third coat may be required diluted at 1:1 and allow to fully dry.
Non-absorbent Subfloors (power floated concrete, epoxy resin, damp proof membranes): Priming with UltraFloor Prime IT MSP is required when applying UltraFloor Level IT Super 30 onto non-absorbent or dense substrates. Apply one coat neat and allow to fully dry (usually 1-2 hours).
How do I mix UltraFloor Level IT Super 30?
Shake the pre-gauged bottle of liquid prior to opening. Pour the entire contents of the liquid into an oversized bucket (20 litres or more capacity). Gradually add the powder
whilst continually mixing using an electric drill fitted with a power whisk, suitable for use with cement materials. After completely adding the powder, continue mixing for a further 2 minutes, keeping the whisk below the surface of the product to minimise air entrainment, until a lump free creamy material is attained. UltraFloor Level IT Super30 should only be mixed as single units. Do not add further liquid or water.