Top brands
We only distribute the best
Free next day delivery
on selected in-stock items
Bulk order discounts
Call 01708 855698
UltraFloor Level IT Renovate Semi Rapid Fibre Reinforced Levelling Compound 20kg
Product code: LEVEL IT RENOVATE
UltraFloor Level IT Renovate Semi Rapid Fibre Reinforced Levelling Compound is suitable for the refurbishment of existing internal and external floors to depths between 3-40mm. It can also be used...
More informationNext day delivery
Click and Collect Available
Product Description
- For internal and external floors
- Can be used as a light duty wearing course
- Foot traffic in as little as 2-2.5 hours
- Ready to receive floor coverings after 4 hours
- Use over most strong and stable subfloors
- Fibre reinforced with flexible properties
- UFH compatible
- Low odour
- Protein free
- NBS Source registered for ease of specification
Product code: LEVEL IT RENOVATE
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Ultra Floor DPM It Rapid Curing Primer Membrane
UltraFloor Level IT Renovate FAQs
What is UltraFloor Level IT Renovate?
UltraFloor Level IT Renovate is a one-part, fibre reinforced smoothing underlayment for the refurbishment of existing internal and external floors and is suitable for use on both commercial and domestic applications.
How do I prep the surface before using UltraFloor Level IT Renovate?
All surfaces must be dry and in a sound and stable condition free from contaminants that may prevent adhesion such as dust, oils, grease, surface laitance, water soluble adhesive residues and weak smoothing underlayments etc. Smooth dense surfaces must be roughened by mechanical scabbling to enhance the key. Subfloors should be tested in accordance with BS8203 to ensure a moisture reading of less than 75% RH should be achieved. Where this has not been attained or where there is uncertainty that the subfloor design incorporates a DPC then UltraFloor DPM IT or UltraFloor Suppress IT must be applied.
UltraFloor recommend consultation with subfloor preparation equipment suppliers to ensure correct equipment for the substrates is selected. All substrates must be above a minimum temperature of 5°C and rising before, during and after application of the primer to ensure film forming and bonding is achieved.
Do I need to use a primer for UltraFloor Level IT Renovate?
Yes, it is recommend to use a primer for UltraFloor Level IT Renovate.
Absorbent Subfloors (concrete, sand & cement and existing smoothing underlayments):Prime with UltraFloor Prime IT Multi-surface Primer (MSP) typically diluted 3 parts water, 1 part primer and allow to fully dry. Apply a second coat diluted 1:1 with clean water allowing it to dry to a pink film (1-2 hours). On highly porous substrates a third coat may be required diluted at 1:1 and allow to fully dry.
Non-absorbent Subfloors (power floated concrete, epoxy resin and damp proof membranes): Priming with UltraFloor Prime IT MSP is required when applying UltraFloor
Level IT Renovate onto non-absorbent or dense substrates. Apply one coat neat and allow to fully dry.
How do I apply UltraFloor Level IT Renovate?
Pour onto the floor and spread with a smooth edge steel trowel. UltraFloor Level IT Renovate has exceptional flow characteristics, a spiked roller may be used to further improve the finish particularly between adjacent units of product. Only spike roll whilst the product is still in its fluid state (immediately due to the limited workability and rapid setting nature).