Top brands
We only distribute the best
Next Day Delivery*
on selected in-stock items
Bulk Discounts: 01708 855 698
Call 01708 855698
UltraFloor Level It Multi Pro Semi Rapid Smoothing Compound
Product code: LEVEL IT MULTI PRO
Next day delivery
Click and Collect Available
Product Description
- Specially formulated with 20% Envirobead® technology – a unique recycled material
- Working time: up to 45 minutes
- Foot traffic in as little as 90 minutes
- Ready to receive bonded floor coverings after 4 hours
- Priming not required*
- Use over most common subfloors, including bitumen and old adhesive residues
- Moisture tolerant
- UFH compatible
- Low odour
- Protein free
- Size: 20kg bag and 5 litre bottle
Product code: LEVEL IT MULTI PRO
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
All orders are shipped on a Next Working Day Service, however Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Ultra Floor DPM It Rapid Curing Primer Membrane
UltraFloor Level It Multi Pro FAQs
What is UltraFloor Level It Multi Pro?
UltraFloor Level It Multi Pro is a rapid curing, high performance free flowing two-part smoothing underlayment.
How do I prepare the surface for UltraFloor Level It Multi Pro?
All surfaces must be dry and in a sound and stable condition free from contaminants that may prevent adhesion such as dust, oils, grease, surface laitance, water-soluble adhesive residues and weak smoothing underlayments etc. Smooth dense surfaces can be roughened by mechanical scabbling to enhance the key. Subfloors should be tested in accordance with BS 8203 to ensure a moisture reading of less than 75% RH is achieved. Where this has not been attained or where there is uncertainty that the subfloor design incorporates a Damp Proof Course (DPC) then UltraFloor DPM IT or UltraFloor Suppress IT must be applied.
UltraFloor recommend consultation with subfloor preparation equipment suppliers to ensure correct equipment for the substrates is selected. All substrates must be at a minimum temperature of 5°C before, during and after application of the primer to ensure film forming and bonding is achieved.
How do I mix UltraFloor Level It Multi Pro?
Shake the pre-gauged bottle of liquid prior to opening. Pour the entire contents of the liquid into an oversized bucket (20 litres or more capacity). Gradually add the powder whilst continually mixing using an electric drill fitted with a power whisk, suitable for use with cement materials. After completely adding the powder, continue mixing for a further 2 minutes, keeping the whisk below the surface of the product to minimise air entrainment, until a lump free creamy material is attained. UltraFloor Level IT Multi Pro should only be mixed as single units. Do not add further liquid or water.
How do I apply UltraFloor Level IT Multi Pro?
Pour onto the floor and spread with a smooth edge steel trowel. UltraFloor Level IT Multi Pro has exceptional flow characteristics, a spiked roller may be used to further improve the finish particularly between adjacent units of product. Only spike roll whilst the product is still in its fluid state, typically up to 10 minutes after application.