Top brands
We only distribute the best
Next Day Delivery*
on selected in-stock items
Bulk Discounts: 01708 855 698
Call 01708 855698
Ardex Arditex CL Plus 2-Part Self Levelling Compound 25kg
Product code: 44881
Standard Delivery 3-5 Days
Product Description
- Apply direct to most substrates without priming, including old adhesive residues and bitumen, Ardex Damp Proof Membranes and ceramic tiles
- Unaffected by moisture and can be used direct to damp concrete
- Walk on after 2 hours and install floorcoverings in as little as 8 hours
- Can be used on heated screeds
Product code: 44881
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
All orders are shipped on a Next Working Day Service, however Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Ardex Arditex CL Plus FAQs
What can I use Ardex Arditex CL Plus for?
For levelling and smoothing most common internal subfloors such as concrete, cement/sand and gypsum (anhydrite) screeds, flooring grade plywood, ceramic tiles, bitumen and flooring grade
asphalt. Ardex Arditex CL Plus can be laid from a feathered edge up to 10mm in a single application or up to 30mm by incorporating Ardex Coarse Aggregate.
NOTE: Ardex Arditex CL Plus should not be used on top of rubber, linoleum, cork or moisture sensitive floorcoverings.
How do I prepare the surface before applying Ardex Arditex CL Plus?
The surface of the subfloor must be clean, sound and free from dust, plaster droppings, grease, paint, polish and any water-softenable or loosely adhered materials. Any remaining adhesive residues should be checked to ensure that they are not water softenable and that they are hard, sound and have sufficient cohesive strength to receive a levelling compound.
Do I need to use a primer?
On absorbent surfaces, it may be necessary to damp down the surface with water before applying the mixed Arditex CL Plus, ensuring there is no standing water, to help reduce suction and
pinholes. If mixes with a high aggregate content require smoothing or if a subsequent layer is required to the standard mix, the dried Arditex CL Plus will usually require damping down or
priming. Priming should be carried out with Ardex P 51 diluted 1:3 with water.
The Ardex P 51 must be applied by broom or brush and not with a roller and allowed to dry prior to applying the Arditex CL Plus.