Top brands
We only distribute the best
Free next day delivery
on selected in-stock items
Bulk order discounts
Call 01708 855698
UltraFloor PrimeIt Multi Surface Primer 5L
Product code: PRIME IT MSP
Next day delivery
Click and Collect Available
Product Description
- Moisture tolerant
- Enhances adhesion
- Reduces pinholing
- Coverage: 200m² at 3:1 dilution
- Can be used as a curing agent
- Size: 5ltr
- Calculation for porous surfaces is based on applying one coat at 3:1 dilution, followed by one coat at 1:1 dilution
- Calculation for non-porous surfaces is based on applying one neat coat of MSP
- NBS Source registered for ease of specification
Product code: PRIME IT MSP
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Ultra Floor DPM It Rapid Curing Primer Membrane
UltraFloor PrimeIt Multi Surface Primer FAQs
What is UltraFloor PrimeIt Multi Surface Primer?
UltraFloor PrimeIt Multi Surface Primer is a moisture tolerant, water based polymer primer, sealer and bonding aid.
How do I prep the surface before applying UltraFloor PrimeIt?
All surfaces must be dry and in a sound and stable condition free from contaminants that may prevent adhesion such as dust, oils, grease, surface laitance, water soluble adhesive residues and weak smoothing underlayments etc. Smooth dense surfaces must be roughened by mechanical scabbling to enhance the key. Subfloors should be tested in accordance with BS8203 to ensure a moisture reading of less than 75% RH should be achieved. Where this has not been attained or where there is uncertainty that the subfloor design incorporates a DPC then UltraFloor DPM IT or UltraFloor Suppress IT must be applied.
UltraFloor recommend consultation with subfloor preparation equipment suppliers to ensure correct equipment for the substrates is selected. All substrates must be at a minimum temperature of 5°C before, during and after application of the primer to ensure film forming and bonding is achieved.
How do I use UltraFloor PrimeIt as a curing agent?
Dilute UltraFloor Prime IT 1:1 with clean water and transfer into a good quality spray bottle. Spray 8-10 inches away from surface immediately upon completion of laying cement materials, to provide an even, continuous film. Do not apply by brush or roller, do not mix with other curing compounds.
How long does UltraFloor Prime IT take to cure?
UltraFloor Prime IT is ready to receive smoothing underlayments in 1-2 hours (at 20c)