Mapei Ultrabond Eco S948 1K – 15kg
Product code: 744915
Ultrabond Eco S948 1K is used for bonding multi-layer pre-finished wood flooring on: cementitious screeds, screeds made using Mapecem, Mapecem Pronto, Topcem, Topcem Pronto and similar products,...
More informationFree Next Working Day Delivery
Out of stock
Product Description
- one-component, ready-to-use product; no catalyst is required, therefore no mixing.
- If stored correctly, remaining quantities of the product may be used again at a later date
- GEV certified, as a product with very low emission level of volatile organic compounds (EMICODE EC1 Plus) and Blauer Engel
- no hazard or warning signs or messages
- easy to apply with excellent ridge holding
- 20-30% more yield compared with conventional two-component adhesives, thanks to its low viscosity and free-owing properties when applied by trowel
- totally free of solvents (according to TRGS 610)
- easy to remove from hands and pre-nished elements
- compatible with Ultracoat Oil and with the water-based lacquers and undercoats of Ultracoat line.
Product code: 744915
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
All orders are shipped on a Next Working Day Service, however Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Mapei Ultrabond Eco 948 1K FAQs
Do I need to user a primer?
A primer is recommended for some substrates such as anhydrite and cementitious screeds. Check the TDS for which primer is suitable for your installation.
How do I apply Mapei Ultrabond Eco 948 1K?
Spread the adhesive on the substrate using a MAPEI notched trowel for wood. Wood has to be laid within approximately 35 minutes under normal temperature conditions (at +23°C and 50% R.H.). If left-over adhesive from previous applications is to be used, open the drum, remove the skin formed on the surface of the adhesive and proceed as above. The skin on the surface helps to preserve the left-over adhesive.
How long do I have to wait until floors can be walked on?
Floors may be walked on after approximately 12 hours.






