Top brands
We only distribute the best
Free next day delivery
on selected in-stock items
Bulk order discounts
Call 01708 855698
Mapei Eporip Solvent Free Epoxy Crack Repair
Standard Delivery 3-5 Days
- Component A: Resin
- Component B: Hardener
- Slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces
- Polymerises without shrinkage
- Waterproof after curing
- Exhibits excellent dielectric properties
- Offers high mechanical strength
- Ensures strong bonding capability between concrete and steel
- EN 1504-9 – Products and systems for the protection and repair of concrete structures: Definitions, requirements, quality control and evaluation of conformity – General principles for the use of products
- EN 1504-4 – Structural bonding (minimum requirements)
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Mapei Eco Prim T Plus
Mapei Primer G
Mapei Eporip FAQs
What is Mapei Eporip?
Mapei Eporip is a two part solvent-free epoxy adhesive, for repairing cracks in screeds and also as a primer for tiling metal surfaces.
How do I prepare the surface before using Mapei Eporip?
Before the application of Eporip, the substrate must be perfectly clean, solid and strong. All loose and crumbling parts, dust, cement laitance and traces of form-release oils and paint must be eliminated by careful sandblasting or brushing. When applying the product to metal, remove any rust and grease residues beforehand, preferably by means of
sand-blasting to white metal.
How do I mix Mapei Eporip?
The two Eporip components have to be mixed.
Pour component B (white) into component A (grey) and mix with a trowel for small quantities or with a drill fitted with a low speed stirrer for large batches until the mix is perfectly smooth and even (the same grey all through). Do not use partial amounts to avoid the risk of accidental ratio errors that could prevent Eporip from curing.
How do I apply Mapei Eporip?
Eporip can be applied with a flat trowel or a brush on dry or slightly damp concrete. It is advisable to let the product penetrate well into particularly uneven and porous areas so as to ensure perfectadhesion to the whole surface being treated.
The subsequent layer of fresh concrete must be placed within the open times according to the temperature indicated in the technical data table.
When Eporip is used to seal cracks wider than 0.5 mm, simply placing is sufficient. In this case it is recommended to spread sand over the Eporip surface in order to favor bonding of product that may be applied subsequently.
If the cracks are narrower than 0.5 mm, they have to be widened and then dusted well before repair work with Eporip. Do not use Eporip when the outside temperature of the substrate is lower than +5°C.