Top brands
We only distribute the best
Free next day delivery
on selected in-stock items
Bulk order discounts
Call 01708 855698
SikaBond TF Plus N EPDM Adhesive
Product code: 134449
Free Delivery | 3-5 Working Days
- Concrete
- Wood
- Aluminium including powder coated
- Most construction materials
- EPDM gaskets to substrates
- Easy, quick application
- Solvent free
- No pre-treatment of membrane needed
- Suitable for uneven substrates
- Highly adaptable
- Waterproof
- Durable
- No additional mechanical fixing
Orders placed before 2pm Monday – Friday (excluding Bank Holidays) will be dispatched the same day if ‘Next Day Delivery’ is displayed on the product listing. Orders placed after this time will be dispatched the following working day.
Orders for non-stock items will be dispatched within 3-5 working days unless contacted by Customer Services.
Saturday and timed deliveries are available on request. Please contact [email protected] or call 01708 855 698 for more information.
Please note postcodes in some areas of the Scottish Highlands and offshore addresses require a delivery surcharge and in some cases can take longer to be delivered. Please contact [email protected] or call 01708 855 698 for a delivery quote.
AB36-38, AB55-56, FK17-21, G83, GY9, HS1-9, IM (ALL), IV (ALL), JE (ALL), KA27, KA28, KW0-14, KW15-17, PA20-78, PH15-18, PH19-29, PH32-33, PH45-48, PH30-31, PH34-44, PH49-99, PO38, ZE (ALL)
It is the customers responsibility to provide an accurate delivery address. If the courier is unable to deliver your order due to issues with access to the delivery address, your goods will be returned to the local delivery depot for delivery on the next working day. Please note a redelivery charge of up to £89 plus VAT per pallet may be applied. If your order is undelivered and returned to us a restocking fee may also be applied.
Please inform us of any delivery restrictions (eg weight restrictions, narrow roads). Failure to do so may incur a redelivery charge if the courier cannot access the delivery address due to undeclared or incorrect delivery restrictions. A redelivery charge of up to £89 plus VAT per pallet may be applied.
If your order is over 150kg it may be delivered on a pallet. The courier will notify you of a two hour delivery window. In the event that no one is available at the address to receive the delivery a charge of up to £89 plus VAT per pallet may be applied for redelivery.
You may also like
Sika Membran Universal EPDM 100mm – 1400mm
Sika Primer 210
Dowsil 995 Structural Sealant 305ml
12 units per box
EVT HPS Sanitary Silicone 310ml
25 units per box
SikaBond TF Plus N FAQs
What is SikaBond TF Plus N ?
SikaBond TF Plus N is a 1-part PU-based adhesive for the SikaMembran façade membrane system.
How do I prepare the surface for applying SikaBond TF Plus N?
Surfaces must be clean, dry and free from grease, oil, dust and contaminants.
Surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond.
Treat non-porous surfaces with Sika Aktivator-205. Clean porous surfaces by wire brush and/or vacuum. On porous substrates exposed frequently to water use Sika Primer-210 or Sika Primer-3 N. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.
How do I apply SikaBond TF Plus N?
SikaBond TF Plus N can be processed between 5 °C and 40 °C but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and adhesive is between 15 °C and 25 °C. Until the adhesive is fully cured the substrate temperature must be in between 5 °C and 40 °C.
To avoid condensation on the surfaces, the temperature of the bonding substrates must be at least 3 °C higher than the dew point of the air.
The skin time is significantly shorter in hot and humid climate. The SikaMembran must always be installed within half of the skin time. Never join bonding parts if the adhesive has built a skin.
SSikaBond TF Plus N can be processed with hand, pneumatic or electric driven piston guns.